ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
13-4
Security Management
v1.0, June 2010
Convert the Dynamic Address Learned from 1/0/1 to the Static Address
The example is shown as CLI commands and as a Web interface procedure.
CLI: Converting the Dynamic Address Learned from 1/0/1 to the Static
Address
(Netgear Switch)(Interface 1/0/1)#port-security mac-address move
Convert the dynamic address learned from 1/0/1 to the static address
(Netgear Switch)(Interface 1/0/1)#exit
(Netgear Switch)(Config)#exit
(Netgear Switch)#show port-security static 1/0/1
Number of static MAC addresses configured: 3
Statically configured MAC Address VLAN ID
---------------------------------------------
00:0E:45:30:15:F3 1
00:13:46:EC:2F:62 1
00:14:6C:E8:81:23 1
Web Interface: Converting the Dynamic Address Learned from 1/0/1 to the
Static Address
To use the Web interface to convert the dynamic address to the static address, proceed as follows:
1.
From the main menu, select Security > Traffic Control >Port Security->Dynamic MAC Address. A
screen similar to the following displays.
Figure
13-3
2.
Under Port Security Configuration, select
1/0/1
in the Port List field.
3.
Select the
Convert Dynamic Address to Static
checkbox.