88
|
Chapter 6. Virtual Private Networking
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
a.
Expand the Key Exchange subheading by double-clicking its name or clicking the
+
symbol. Then select
Proposal 1
below Key Exchange.
b.
In the SA Life drop-down list, select
Unspecified
.
c.
In the Compression drop-down list, select
None
.
d.
Select the
Encapsulation Protocol (ESP)
check box.
e.
In the Encrypt Alg drop-down list, select the type of encryption that is configured for
the encryption protocol in the N300 wireless modem router, as listed in
Table
1
on
page
78. This example uses Triple DES.
f.
In the Hash Alg drop-down list, select
SHA-1
.
g.
In the Encapsulation drop-down list, select
Tunnel
.
h.
Leave the
Authentication Protocol (AH)
check box cleared.
7.
Save the VPN client settings.
In the Security Policy Editor window, select
File > Save
.
After you have configured and saved the VPN client information, your PC automatically
opens the VPN connection when you attempt to access any IP addresses in the range of
the remote VPN router’s LAN.
8.
Check the VPN connection.
To check the VPN connection, you can initiate a request from the remote PC to the N300
wireless modem router’s network by using the Connect option in the NETGEAR ProSafe
menu bar. The NETGEAR ProSafe client reports the results of the attempt to connect.
Since the remote PC has a dynamically assigned WAN IP address, it must initiate the
request.
To perform a ping test using our example, start from the remote PC:
a.
Establish an Internet connection from the PC.
b.
On the Windows taskbar, click the
Start
button, and then select
Run
.
