NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual Download

Page: 47 / 177

Chapter 3. Security Settings

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual

Figure 29.

The following information is provided in the logs:

Configuring Email Alert and Web Access Log Notifications

To receive logs and alerts by e-mail, you must provide your e-mail account information.

From the main menu, select

Security > E-mail

. The E-mail screen displays.

Field

Description

Date and time

The date and time the log entry was recorded.

Source IP

The IP address of the initiating device for this log entry.

Target address

The name or IP address of the website or newsgroup visited, or to which access was
attempted.

Action

Whether the access was blocked or allowed.

Summary of Contents for DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router


















































































































































































Search results

Summary of Contents for DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router

Reviews:

Related manuals for DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router

Brands by name

Popular brands

NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router, User Manual

Search results

Summary of Contents for DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router

Reviews:

Related manuals for DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router

Brands by name

Popular brands