NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual Download | Manualshive

Page: 44 / 177

background image

44

|

Chapter 3. Security Settings

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual

Figure 25.

2.

Specify the information for port triggering:

•

Service Name

. Enter a name for the rule, up to 30 characters.

•

Service User

. The PC on the LAN that can use the port triggering rule to create a

dynamic inbound mapping to it. There are 2 options:

-

The port triggering rule is applied to all PCs on the LAN. That is, any PC on the

LAN can use the rule and make the router to open a dynamic mapping to it.

-

The port triggering rule is applied only to the user-specified PC on the LAN.

•

Service Type

. Defines whether the traffic is TCP or UDP.

•

Triggering Port

. The destination port number of the traffic. That is, when there is a

packet from a LAN PC that the rule is applied to, with the specified service type and
destined to the specified triggering port, the router creates a rule for dynamic mapping
to the LAN PC.

•

Required Inbound Connection

. This defines what the dynamic mapping is. The

connection type defines whether the dynamic mapping is for TCP traffic, UDP traffic,
or TCP and UDP traffic. The open port range is specified by the starting port and the
ending port, and this defines the port that the dynamic mapping is applied to.

3.

Click

Apply

to save your settings and activate the port triggers that you have enabled.

Blocking Access to Internet Services

The N300 wireless modem router allows you to block the use of certain Internet services by
computers on your network. This is called service blocking or port filtering. Services are
functions performed by server computers at the request of client computers. For example,
Web servers serve Web pages, time servers serve time and date information, and game
hosts serve data about other players’ moves. When a computer on your network sends a
request for service to a server computer on the Internet, the requested service is identified by
a service or port number. This number appears as the destination port number in the
transmitted IP packets. For example, a packet that is sent with destination port number 80 is
an HTTP (Web server) request.

«
...
42
43
44
45
46
...
»

Summary of Contents for DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router


















































































































































































Reviews:

No comments

Related manuals for DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router

Brand: Wavion Pages: 66

Brand: ZyXEL Communications Pages: 2

Brand: sauter Pages: 8

StreamBuds Hybrid

Brand: Mixx Pages: 17

SURFboard SBR-AC1200P

Brand: Arris Pages: 58

Barricade SMC7004VWBR V.2

Brand: SMC Networks Pages: 82

Brand: Mach Power Pages: 24

AirLive WLA-5000AP

Brand: Ovislink Pages: 19

Brand: Linksys Pages: 17

Brand: Avaya Pages: 425

Brand: Audio Technica Pages: 18

Brand: Kaba Pages: 2

Brand: Status Pages: 28

Brand: Status Pages: 48

Brand: Skullcandy Pages: 1

Brand: Skullcandy Pages: 31

Brand: Xclaim Pages: 4

Brand: geetek Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands