Chapter 2. Wireless Settings
|
23
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
To configure WPA or WPA2 in the N300 wireless modem router:
1.
Log in to the N300 wireless modem router at its default LAN address of
http://192.168.0.1
or
http://www.routerlogin.net
with its default user name of
admin
and default password of
password
, or using whatever user name, password, and LAN
address you have chosen for the N300 wireless modem router.
2.
From the main menu select
Wireless Settings
.
3.
On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your
choice.
Figure 11.
4.
The settings displayed on the screen depend on which security option you select.
5.
For WPA-PSK or WPA2-PSK, enter the passphrase.
6.
If prompted, enter the settings for the RADIUS server. For WPA-802.1x or WPA2-802.1x,
these settings are required for communication with the primary RADIUS server.
Note:
RADIUS server applies only to WPA-802.1x, and not to Mixed WPA
+ WPA2.
•
Primary Radius Server IP Address
. The IP address of the RADIUS server. The
default is 0.0.0.0.
•
Radius Port
. Port number of the RADIUS server. The default is 1812.
•
Shared Key
. This is shared between the wireless access point and the RADIUS
server during authentication.
7.
To save your settings, click
Apply
.
