Ness SDI Page 29 User Manual Download

Page: 29 / 61

Digital Video Recorder for Ness IQ-Series

Use

key if wish to erase password on keyboard.

3.2.4 System Log

Please click (

) SYSTEM>System Log and the following screen will appear.

System Log displays diverse events as below events by specifying the user account that actually

Setup (Menu) Enter/Exit

Playback Mode Enter/Exit

Network Access Enter/Exit

Archive Success/Fail

System Start/shut down

S.M.A.R.T. Check

NTP Sync/ Server Success/Fail

Send E-mail Success/Fail

HDD Format Success/Fail

Data clear Success/Fail

USB Upgrade Success/Fail

DVR Setup Change by Remote

Before/After Time Adjust

Video loss

System Log removal procedure is as follows:

Execute Clear All Data in SYSTEM>Information>Record and choose ‘OK’ on the popup dialogue box. Please note that

normal recorded video data are deleted from database.

Press Factory Reset Switch on the back panel. Please note that the entire menu setup is also defaulted.

3.2.5 Exit

Please click (

) SYSTEM>Exit and choose ‘OK’ on the popup dialogue box to exit from t

CAUTION

ANY CHANGES MADE IN SETUP WILL BE APPLIED AFTER EXIT.

Series 960H & SDI DVR

key if wish to erase password on keyboard.

SYSTEM>System Log and the following screen will appear.

displays diverse events as below events by specifying the user account that actually

System Log removal procedure is as follows:

Execute Clear All Data in SYSTEM>Information>Record and choose ‘OK’ on the popup dialogue box. Please note that

normal recorded video data are deleted from database.

Press Factory Reset Switch on the back panel. Please note that the entire menu setup is also defaulted.

SYSTEM>Exit and choose ‘OK’ on the popup dialogue box to exit from the setting.

APPLIED AFTER EXIT.

Page 29

displays diverse events as below events by specifying the user account that actually has accessed the DVR.

Execute Clear All Data in SYSTEM>Information>Record and choose ‘OK’ on the popup dialogue box. Please note that all

Press Factory Reset Switch on the back panel. Please note that the entire menu setup is also defaulted.

he setting.

Summary of Contents for SDI






























































Search results

Summary of Contents for SDI

Reviews:

Related manuals for SDI

Brands by name

Popular brands

Ness SDI, User Manual

Search results

Summary of Contents for SDI

Reviews:

Related manuals for SDI

Brands by name

Popular brands