Digital Video Recorder for Ness IQ-Series
CAUTION
INSTALL HARD DISK AFTER DVR POWER IS OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HARD DISK. TO
TURN OFF DVR, PLEASE CLICK (
) SETUP>
SUPPLY AGAIN.
CAUTION
FOR INSTALLATION/ADDITION/REPLACEMENT/REMOVAL OF HDD (DVD
OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HDD (DVD
INSTALLATION/ADDITION/MOVING/REPLACEMENT
FORMATTING. OTHERWISE, DVR WON
ABNORMALLY. PLEASE FOLLOW THE BELOW PROCEDURE FOR
①
(DATE/TIME SETUP) SET UP THE CURRENT DATE
②
(INITIALIZATION OF SYSTEM SETUP)
-
(SETUP>SYSTEM>INFORMATION>STATUS>SETUP>DEFALUT)
③
(HDD FORMAT) HDD FORMAT IS DONE BY S
HDDS, EACH MUST BE FORMMATED SEPARATELY. WHEN THE FORMAT IS COMPLETED, DVR WILL AUTO
REMOVAL: FOLLOW THE REMOVE PROCEDURE EVEN WHEN A PRE
REMOVED. – SETUP>SYSTEM>ADMIN>STORAGE>FORMAT, CLICK
FORMAT HEADINGS OF A CRRESPONDING HDD TO DISCARD
DVR WILL AUTO-REBOOT.
1.4.5 Maximum HDD Capacity
Each model has a different HDD capacity recognition.
Below table shows the recommended maximum HDD capacity for each model.
Type
4 / 8 Channel 960H
& 4 Channel SDI
Max Capacity
6TB
1.4.6 DVD-RW installation
Securely fix DVD-RW by using bracket and screws provided herewith.
Please do not use any different DVD-RW cables (data cable and power supply cable) other than the ones we provide.
Otherwise, it may cause damage to the DVD
Only one DVD-RW can be used. Mount it at the
CAUTION
INSTALL DVD-RW OR/AND HARD DISK AFTER DVR POWER OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE
HARD DISK. TO TURN OFF DVR, PLEASE CLICK
PLUGGING IN POWER SUPPLY AGAIN.
Series 960H & SDI DVR
TER DVR POWER IS OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HARD DISK. TO
SETUP>SYSTEM>SHUTDOWN. ALSO, WAIT FOR 5 SECONDS BEFORE PLUGGING IN POWER
FOR INSTALLATION/ADDITION/REPLACEMENT/REMOVAL OF HDD (DVD-RW), MAKE SURE THAT DVR IS TURNED
OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HDD (DVD-RW)
INSTALLATION/ADDITION/MOVING/REPLACEMENT: USER SHOULD START ‘HDD INITIALIZATION
FORMATTING. OTHERWISE, DVR WON’T RECOGNIZE THE HARD DISK AND MAY BEGIN TO FUNCTION
ABNORMALLY. PLEASE FOLLOW THE BELOW PROCEDURE FOR ‘HDD INITIALIZATION
SET UP THE CURRENT DATE AND TIME (SETUP>SYSTEM>ADMIN>DATE
LIZATION OF SYSTEM SETUP) ALL VALUES IN SETUP ARE RESTORED TO FACTORY DEFAULT SETTINGS.
INFORMATION>STATUS>SETUP>DEFALUT)
FORMAT IS DONE BY SETUP>SYSTEM>ADMIN>STORAGE>FORMAT. IF
MATED SEPARATELY. WHEN THE FORMAT IS COMPLETED, DVR WILL AUTO
: FOLLOW THE REMOVE PROCEDURE EVEN WHEN A PRE-INSTALLED HARD DISK HAS BEEN
SETUP>SYSTEM>ADMIN>STORAGE>FORMAT, CLICK
(
) ‘REMOVED’ITEM UNDER THE DISCRETE
FORMAT HEADINGS OF A CRRESPONDING HDD TO DISCARD ‘HDD’ ITEM. WHEN THE REMOVE PROCEDURE IS COMPLETED,
Maximum HDD Capacity
Each model has a different HDD capacity recognition.
maximum HDD capacity for each model.
16 Channel 960H &
8 / 16 Channel SDI
12TB
RW by using bracket and screws provided herewith.
RW cables (data cable and power supply cable) other than the ones we provide.
Otherwise, it may cause damage to the DVD-RW.
RW can be used. Mount it at the SATA port 5 (16 channel 960H & 8 / 16 channel SDI
RW OR/AND HARD DISK AFTER DVR POWER OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE
HARD DISK. TO TURN OFF DVR, PLEASE CLICK (
) SETUP>SYSTEM>SHUTDOWN. ALSO, WAIT FOR 5 SECONDS BEFORE
Page 11
TER DVR POWER IS OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HARD DISK. TO
WAIT FOR 5 SECONDS BEFORE PLUGGING IN POWER
RW), MAKE SURE THAT DVR IS TURNED
HDD INITIALIZATION’ INCLUDING
T RECOGNIZE THE HARD DISK AND MAY BEGIN TO FUNCTION
HDD INITIALIZATION’.
ATE/TIME)
ALL VALUES IN SETUP ARE RESTORED TO FACTORY DEFAULT SETTINGS.
THERE ARE MORE THAN TWO
MATED SEPARATELY. WHEN THE FORMAT IS COMPLETED, DVR WILL AUTO-REBOOT.
INSTALLED HARD DISK HAS BEEN
ITEM UNDER THE DISCRETE
ITEM. WHEN THE REMOVE PROCEDURE IS COMPLETED,
RW cables (data cable and power supply cable) other than the ones we provide.
960H & 8 / 16 channel SDI Only).
RW OR/AND HARD DISK AFTER DVR POWER OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE
WAIT FOR 5 SECONDS BEFORE
