Ness SDI Page 10 User Manual Download

Page: 10 / 61

Digital Video Recorder for Ness IQ-Series

Installation

1.4 Hard disk and DVD-RW Installation

1.4.1 SATA Port

When installing HDDs, make sure to connect from SATA 1 Port.

4 / 8 Channel 960H & 4 Channel SDI

Main substrate of this DVR has two SATA port: it is indicated as SATA

16 Channel 960H & 8 / 16 Channel SDI

Main substrate of this DVR has five SATA ports: they are indicated as SATA 1, 2, 3, 4 and SATA 5.

Please mount DVD-RW at the SATA 4

4 / 8 CH 960H &

4 channel SDI DVR

Storage

HDD

16 CH 960H &

8 / 16 Channel SDI DVR

Storage

HDD

1.4.2 Internal SATA Storage

16 channel 960H & 8 / 16 channel SDI

SATA Ports 1-4: It is designed to mount HDD.

SATA Port 5: Please mount DVD-RW.

Only one DVD-RW can be installed among the SATA Ports.

1.4.3 e-SATA External Storage

These series DVRs have one external SATA Port; the picture above shows external

SATA Port 6: It is designed to mount 4HDDs

1.4.4 HDD Installation

Securely fix a hard disk by using bracket and screws provided herewith.

Please do not use any different hard disk cables (data cable and power supply cable) other than ones we provide.

Otherwise, it may cause damage to the hard disk.

Series 960H & SDI DVR

RW Installation

When installing HDDs, make sure to connect from SATA 1 Port.

960H & 4 Channel SDI

SATA port: it is indicated as SATA 1 and 2.

960H & 8 / 16 Channel SDI

Main substrate of this DVR has five SATA ports: they are indicated as SATA 1, 2, 3, 4 and SATA 5.

4 port.

Storage

SATA 1, 2 Port

HDD

HDD

Storage

SATA 1, 2, 3, 4, 5

DVD-RW

HDD

---

HDD

---

HDD

960H & 8 / 16 channel SDI DVR have 5 internal SATA Ports.

It is designed to mount HDD. Connect from SATA 1 port when installing HDDs.

RW can be installed among the SATA Ports.

SATA External Storage (16 Channel 960H & 8 / 16 channel SDI

external SATA Port; the picture above shows external SATA 6 Port

: It is designed to mount 4HDDs per each external SATA Port.

Securely fix a hard disk by using bracket and screws provided herewith.

Please do not use any different hard disk cables (data cable and power supply cable) other than ones we provide.

damage to the hard disk.

Page 10

Main substrate of this DVR has five SATA ports: they are indicated as SATA 1, 2, 3, 4 and SATA 5.

SATA 1, 2 Port

---

HDD

, 3, 4, 5 Port

---

DVD-RW

---

DVD-RW

---

DVD-RW

HDD

DVD-RW

HDD

---

Connect from SATA 1 port when installing HDDs.

960H & 8 / 16 channel SDI)

SATA 6 Port.

Please do not use any different hard disk cables (data cable and power supply cable) other than ones we provide.

Summary of Contents for SDI






























































Search results

Summary of Contents for SDI

Reviews:

Related manuals for SDI

Brands by name

Popular brands

Ness SDI, User Manual

Search results

Summary of Contents for SDI

Reviews:

Related manuals for SDI

Brands by name

Popular brands