Ness D16 Installation & Programming Manual Download Page 55

Page: 55 / 64

P R O G R A M M I N G

NESS D16 (V4.6) CONTROL PANEL - INSTALLER MANUAL

CLEAR MEMORY

Enter P96E when in Installer Program mode to clear all events in the Alarm memory display.

PROGRAMMING SEQUENCE:

P96E

Clears Alarm Memory display

P96E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

[not applicable]

FACTORY DEFAULTS

This option restores program options to the factory default values.

The panel options P00E - P08E, P26E - P91E, P117 - P119 are all defaulted.

PROGRAMMING SEQUENCE:

P97E

Restores Factory Defaults

P97E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

[not applicable]

NOTES:

• This option DOES NOT clear Radio Device

Codes, User Codes or the Installer Code.

CLEAR USER CODES

This option clears all User codes and Radio Codes (Radio Keys) and restores factory
default codes.

P09E-P10E are defaulted (Radio Codes assignment)

P11E - P25E are defaulted (User Codes 1-15)

PROGRAMMING SEQUENCE:

P98E

Clears User Codes

P98E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

User Code 1: 123
All other codes: [blank]

NOTES:

• This option DOES NOT clear the Installer Code.

CLEAR RADIO DEVICES

This option clears all Radio Device Codes. (Except Radio Keys assigned to Radio Codes).
Options P101E - P116E are defaulted (D16 Radio Devices)

PROGRAMMING SEQUENCE:

P95E

Clears Radio Device Codes

P95E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

[not applicable]

These options allow selective
restoring of various factory defaults.
For example, you can default (clear)
all the User Codes, without affecting
any other programmed options.

OPTION No

DESCRIPTION

DEFAULT

NOTE

P96E

P95E

P97E

P98E

P99E

Clear Memory

Clear Radio Devices

Restore Factory Defaults

Clear User Codes

Program the Installer Code

not applicable

000000

PROGRAM THE INSTALLER CODE

Programs the installer code. This code can be 3 to 6 digits long. Factory default installer
code is 000000.

PROGRAMMING SEQUENCE:

P99E

[Enter new code]

[Enter new code again]

(Unlike User Codes, the installer code is not displayed when programming)

P99E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

000000

NOTES:

For a complete list of factory default values, see the

Programming Options Summary on page 63.

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for D16

































































Search results

Summary of Contents for D16

Reviews:

Related manuals for D16

Brands by name

Popular brands

Ness D16, Installation & Programming Manual

Search results

Summary of Contents for D16

Reviews:

Related manuals for D16

Brands by name

Popular brands