Ness D16 Installation & Programming Manual Download Page 45

Page: 45 / 64

P R O G R A M M I N G

NESS D16 (V4.6) CONTROL PANEL - INSTALLER MANUAL

1E 2E 3E 4E 5E 6E 7E 8E

ON = Factory default setting.

Disable dialler Contact ID for

mat

Audible DTMF for

mat

Audible PULSE for

mat

Contact ID + Audible DTMF

Contact ID + Audible PULSE

OPTION No

DESCRIPTION

P86E

Reporting Formats

DISABLE DIALLER

This option disables the dialler even if telephone numbers and other dialler
options are programmed.

Up download or remote telephone access remain enabled.

PROGRAMMING SEQUENCE:

P86E 1E

turns the option ON

P86E 1E ON: Dialler disabled

P86E 1E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

Off: dialler enabled

NOTES:

• This option is useful for temporary

disabling of the dialler without affecting
other dialler options.

• Only one option in the range

P86E 1E—6E is allowed to be ON

CONTACT ID FORMAT

This option enables the reporting of alarms to a Central station via telephone
numbers 1 & 2 using Contact ID format.

PROGRAMMING SEQUENCE:

P86E 2E

turns the option ON

P86E 2E ON: Contact ID format enabled

P86E 2E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

ON: Contact ID format enabled

NOTES:

• Only one option in the range

P86E 1E—6E is allowed to be ON

AUDIBLE DTMF FORMAT

For Audible Monitoring to any telephone or mobile phone. The last digit of the
Account number and the zone alarm are sent in Audible DTMF format.

The message is repeated for 45 seconds or until kissed-off by the receiving
telephone.

PROGRAMMING SEQUENCE:

P86E 3E

turns the option ON

P86E 3E ON: Audible DTMF format enabled

P86E 3E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

OFF

NOTES:

• Only one option in the range

P86E 1E—6E is allowed to be ON

AUDIBLE PULSE FORMAT

For Audible Monitoring to any telephone or mobile phone. The last digit of the
Account number and the zone alarm are sent in Audible PULSE format.

The message is repeated for 45 seconds or until kissed-off by the receiving
telephone.

PROGRAMMING SEQUENCE:

P86E 4E

turns the option ON

P86E 4E ON: Audible PULSE format enabled

P86E 4E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

OFF

NOTES:

• Only one option in the range

P86E 1E—6E is allowed to be ON

• This is the best option to select for

Audible Monitoring.

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for D16

































































Search results

Summary of Contents for D16

Reviews:

Related manuals for D16

Brands by name

Popular brands

Ness D16, Installation & Programming Manual

Search results

Summary of Contents for D16

Reviews:

Related manuals for D16

Brands by name

Popular brands