Neptune 13458-000, Installation And Maintenance Manual

Page: 63 / 150

Mounting the RF antenna to a Large Pole
Mount the RF antenna to a 5-inch to 16-inch (12.7 to 40.65 cm)
diameter pole by completing the following steps.
Figure 52 – Large Pole Bracket
1. Mount the RF antenna bracket to the large pole using
the two stainless steel Snaplock clamps. See Figure 52.
Figure 53 – RF Antenna Bracket
2. Mount the RF antenna to the bracket. See Figure 53.
Do not hoist the antenna while it is attached to the coax
cable. Doing so may damage the antenna connector.
Always hoist the coax cable and antenna separately.
Attach the coax cable after the antenna is hoisted and
mounted.
R900 Gateway Installation and Maintenance Guide 45
Chapter 4: Installation of the Gateway