Neptune 13458-000, Installation And Maintenance Manual

Page: 118 / 150

Install a roof pad beneath the stand to protect the roof
surface. For a 5 ft. x 5 ft. (1.5 m x 1.5 m) ROHN stand,
use ROHN Part No. R-JRMPAD or JRMPAD.
ROHN Industries Stand
The ROHN-JRM stand ships disassembled on one skid and
weighs approximately 50 lbs when assembled. It is 10 ft. (3 m)
high and has a base that is 5 ft. x 5 ft. (1.5 m x 1.5 m). The stand
is galvanized for corrosion protection. For ballast requirements for
the ROHN Industries Stand (Part No. JRM23855), refer to the
JRM Non-Penetrating Roof Mount section at ROHN'S website:
http://w.w.w.rohnnet.com/rohn-jrm-mount.
Figure 103 – ROHN JRM23855 Stand
100 R900 Gateway Installation and Maintenance Guide
Appendix B Ballast