Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
5
1 Purpose and function
The tracker is intended for installation on a vehicle as an additional device that records the
location of the vehicle, its speed, and travel direction. View of the tracker is shown in Figure 1.
Additionally, the voltage level at the analogue inputs and data received from supported sensors
connected via radio channel Bluetooth Low Energy. All events and conditions fixed by the tracker
are stored in its non-volatile memory.
The accumulated data is transmitted through the GSM 850/900/1800/1900 cellular network
operator using packet data transmission technology GPRS to a dedicated server with a static IP
address or domain name from which it can be received via the Internet for further analysis and
processing in a monitoring center.
The tracker can be configured in any convenient way: locally (via Bluetooth, using the ADM
Configurator (hereinafter referred to as
Сonfigurator) or remotely (by sending commands via SMS
or GPRS).
To ensure data security, when the external power is turned off and the GSM network is lost,
the tracker has a non-volatile memory. Data transmission is possible only if there is a GSM
850/900/1800/1900 cellular network supporting a packet data service (GPRS).
Figure 1
– View of the tracker
The vehicle travel route is described in the form of separate points in time. The route point is
saved when at least one event occurs, such as:
⎯
travel direction changes by an angle which is greater than the pre-set one;
