Neomatica ADM333 BLE, Operation Manual

Page: 39 / 48

Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
39
Command Answer Parameters Description
27 INSTATIC X,Y
Example: INSTATIC 1,0
INSTATIC X,Y
Example: INSTATIC 1,0
X=0
– input number,
Y=0, 1
– activation by zero
or one.
X=255 –disabled function;
Set the input number to enable the
coordinates fixation mode. A command
without parameters returns the current
setting. By default, no one input is set to
enable coordinates fixation mode.
28 ACCELSTATIC X,Y,Z
Example: ACCELSTATIC
10
ACCELSTATIC X,Y,Z
Example: ACCELSTATIC
10
X – timeout to enable static
mode (in seconds)
X=255 -disabled function
Y – acceleration threshold to
get out from static mode
(mg)
Z – timeout to get out from
static mode in counting
Enabling and disabling coordinates fixation
according to vibration level. Set the
coordinates fixation parameters according
to vibration level.
29 OUTPUT X
Example: OUTPUT 0
OUTPUT X
Example: OUTPUT 0
X=1
– output is active
X=0
– disabled output.
Control of tracker output. Command
without parameters returns the current
output settings.
30 RESET
reset… Command without
parameters
Restart of the unite
31 UPDATE
start update… Command without
parameters
Firmware renewal