Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
43
9 Updating tracker software
The tracker software (firmware) can be updated via Bluetooth radio channel or a GPRS
channel.
9.1 Updating tracker software via ADM Configurator
The ADM Configurator program, if the computer has access to the Internet, checks the current
firmware version on the update server, and, if necessary, downloads the firmware file.
To update the firmware, do the following:
establish connection between the tracker and the ADM Configurator program using the procedure
described in.
5.1 «Connection to ADM Configurator»
1) if the firmware version is found to be more up-to-date than the one installed in the tracker,
ADM Configurator will notify of its presence -a notification will be displayed in the lower left
corner;
2) click "Update available";
3) in the opened "Notifications" tab, click "Update";
4) after the update, the tracker will reboot and become available for operation
ATTENTION!
Do not switch off the tracker during the firmware upgrade until the tracker is detected
by the setup program. Otherwise, it is possible to damage the software, which must be restored in
the service center of the manufacturer.
9.2 Updating tracker software via ADM Configurator using a firmware file
The firmware file must be requested from the technical support.
To update the firmware via Bluetooth radio channel using the firmware file, do the following:
establish connection between the tracker and the ADM Configurator program using the procedure
described in.
5.1 «Connection to ADM Configurator»;
1) open the "Settings" section in the "Device" tab, click - "Flash file";
2) click
«Update» in the pop-up window;
3) drag the firmware file to the appropriate field in the ADM Configurator window;
4) after updating the firmware, the tracker will reboot and become available for operation
