Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
24
Examples of using commands:
BLEAUTOCATCH
– automatic search by default, with the filter as regards the signal level.
BLEAUTOCATCH 255,0
– automatic search of all supported sensors without filters.
BLEAUTOCATCH 0
– stop the current search
6.3.2.1 Additional parameters of automatic sensors search
In case of necessity the criteria of automatic search can be changed by entering certain
parameters.
BLEAUTOCATCH
command has 4 parameters D, F, R, T.
Description of parameters of
BLEAUTOCATCH D,F,R,T
command :
•
D
– sensor type.
When entering such a parameter only the sensors of the indicated type will be added. Table 2.
shows the correspondence of values to the BLE sensors types. In case several sensors types should
be bound simultaneously then add several needed parameter values.
Table 2. Types of supported BLE sensors.
Sensor type
Parameter value
ADM31, ADM32
1
ESCORT fuel level sensor (BLE)
2
Technoton fuel level sensor BLE (DUT-E)
4
Technoton axis load sensor BLE (GNOM)
8
All types of the supported sensors
255
•
R
–RSSI level
Acceptable filter range from minus 1 to minus 127 dBm.
Entering value without a character is acceptable from 1 to 127.
•
T
– search time in seconds.
Acceptable range of search duration from 10 seconds to 120 seconds.
6.3.2.2 Usage options of
«BLEAUTOCATCH» command.
•
Search within 120 seconds, without the filter according to radio signal level minus 60 dBm.
BLEAUTOCATCH
