Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
26
BLESENSORINFO X
– displays the data of the sensor under number X, where X is the number
of the device from the BLESENSOR sensors list.
BLESENSORINFO
- command without parameter displays information about all the configured
sensors;
Example of the answer:
BLESENSORINFO: [0]:DD9DD495C467; DT:2; PT:1; F:1; V:3.2; A:1; R:-35; LMT:20; S:0;
[1]:EE53F61FCC05; DT:0; PT:0; F:0; V:25.5; T:-300.00; L:655.35; H:255, R:0; LMT:0; S:32768;
Description of answer parameters:
Fields, general for all types of sensors ADM3x.
Sensor address
DT
– type of the device.
PT
– type of the packet.
F
– software version.
V
– battery voltage.
R
– level of RSSI in dBm.
LMT
– time passed from the receipt of the last message from the sensor.
S
– sensor status.
ADM31
T - temperature.
L - illumination.
H - humidity.
ADM32
A
– angle value in degrees.
6.3.3.2 Setting the acceptable readings range for ADM31/32 sensors
When the readings are beyond the acceptable range the tracker will switch to the route
points record at an alarm period.
Setting the acceptable temperature range.
