Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
10
The internal GLONASS/GPS and GSM antennas are used in the tracker, which allow its
installation almost in any place of the vehicle. However, it is not recommended to install it in the
places where the received signals will be attenuated by the vehicle metallic housing, since this may
affect the tracker working quality. For a proper function of the receiver GLONASS/GPS, put the
tracker so that its sticker is directed upwards.
Insert into the holder a SIM card SIM0 with a deactivated PIN code request, activated data
transmission service via GPRS, SMS and sufficient balance for these services.
Supply the power to the tracker according to the layout in Figure 3 and the scheme of pins
location in Figure 2. When connecting the plus of the vehicle network to the tracker, install a 2A
fusible as close as possible to the point of connection to the vehicle network, which is especially
important when connecting directly to the battery clamp.
Figure 3
– Standard connection layout of the tracker
If there are valid satellite data and an established connection to the server, the tracker will
catch the time, coordinates and transmit information packets to the server, which will be marked by
a single flashing of the green and blue LEDs.
