UX5000 IP Terminal AutoConfig Setup
2 - 34
IP Terminal AutoConfig Setup
4.4
DHCP Server Setup Windows 2003 Server Example
1. In the DHCP server highlight the server machine on the left-hand side.
Right-click on the server and choose
Define Vendor Classes
.
Click
ADD
.
Display Name =
NECUXIP
Description =
auto config
In the same window down below there is a section that shows
ID, Binary, and ASCII.
Click in that window under ASCII. Now enter
NECUXIP
. This
should have also added
4E 45 43 44 54 37 30 30
under the
binary section. Now click on
OK
and close.
2. Highlight the server again then right-click and choose
Set Predefined
Options
.
Change the option class to
NECUXIP
.
Click
ADD
and give the following info.
Name =
FTP Address
Data Type =
IP address
Code =
141
Click on
OK
, and start the process over again
Click on
ADD
and give the following info.
Name =
Auto Config File Name
Data Type =
String
Code =
151
Click on
ADD
and give the following info.
Name =
Download Protocol
Data Type =
Byte
Code =
163
Click
OK
.
Summary of Contents for UX5000
