NEC UX5000 Resource Manual Download Page 79 | Manualshive

Page: 79 / 220

NEC UX5000 Resource Manual Download Page 79

UX5000 IP Terminal AutoConfig Setup

UX5000 IP Resource Manual

2 - 21

3.4

Save Screen

Using the Save Button offers a few parameters to help control the Configuration File.
There are separate Save screens for single and multiple configuration files. After
saving the file(s), use the Download option within the IP Phone Manager to download
the configuration data file to the terminal(s).

3.4.1 Single Configuration Save Screen

File Type

❏

Save Selected – The file is updated only with the data for which
the Parameter Update check box is selected in each editing
screen. The data is merged into the selected Configuration
File.

❏

Save All – This selection will build a completely new
Configuration File.

File Name

❏

If an existing file has been imported for editing or previously
saved the name of the existing file will be displayed.

❏

If the current file has not been previously saved, this field will
be empty.

Figure 2-24 Single Configuration Save Screen

«
...
77
78
79
80
81
...
»

Summary of Contents for UX5000





























































































































































































































Reviews:

No comments