manualshive.com logo in svg

NEC UX5000, Resource Manual, Page: 194 / 220

Share
Download
NEC UX5000 Resource Manual Download Page 194

UX5000 IP Data Maintenance

6 - 50

Data Maintenance Tool

Tool-Related

Message

Is it not corresponded in the specified terminal.

Explanation

The model of the specified terminal does not support the 
executed function.

Response

Executable functions depend on a terminal model. For details, 
refer to the manual.

Message

This voice file cannot be optimized.

Explanation

An attempt to convert the voice file format has failed.

Response

The specified voice file may have been corrupted.

Message

This voice file was not downloadable.

Explanation

An attempt to read the specified voice file has failed.

Response

The specified voice file may have been corrupted.

Message

This voice file was not downloadable.

Explanation

An attempt to read the specified picture file has failed.

Response

The specified voice file may have been corrupted.

Message

Tool Manager starting error. This tool is not able to run more than 
one.

Explanation

An attempt was made to start Tool manager several times.

Response

Check if Tool Manager is already open.

Message

The application illegally started. Please start from a Tool 
Manager.

Explanation

The tool was started illegally.

Response

Start the tool from Tool Manager.

Message

Tool starting error.

Explanation

An attempt to start each tool has failed.

Response

The Data Maintenance Tool may have been destroyed. Repair or 
reinstall the application.

Summary of Contents for UX5000





























































































































































































































Reviews:

No comments