manualshive.com logo in svg

NEC UX5000, Resource Manual

Share
Download
NEC UX5000 Resource Manual Download Page 210

UX5000 IP Terminal Features

7 - 16

IP Terminal Features

S

ECTION

 9 

XML: P

OP

-U

P

 

OF

 S

TATION

 D

ISPLAY

 I

NFORMATION

 

FOR

 IP-CTS

With the IP-CTS terminal and firmware 93.0.7.0 or higher, when using the XML 
capability in fixed mode (the XML window is always shown when idle), an option is 
available which will provide a pop-up of the terminal’s idle system information display 
- date, day, time, extension number, and Soft Keys.

The pop-up window can be automatically or manually displayed. With the automatic 
display, when the IP-CTS terminal is active (an incoming call, placing a call, 
transferring a call, on hold), the window is displayed. When the terminal returns to an 
idle state, the window closes. Or, the user can manually close the pop-up window by 
touching the close button in the upper right of the window.

This option requires the use of an HTTP server, like IIS.

9.1

Setup:

1. Download the sample Pop-Up zip file from the NEC Technical Support Site 

(www.necux500.com).

This file contains the XML file to be edited/saved as well as the 
Popup.NIP file referenced within the XML file.

2. Unzip the sample Pop-Up zip file and place the files into the 

C:\INETPUB\wwwroot

 folder on the server PC which is used for the XML 

applications.

The INETPUB folder is created when the IIS service is installed 
as part of the XML setup. Refer to the XML Software 
Application Manual, P/N 0193220, for further details on the 
initial XML setup.

3. Right-click on the 

pop_up-sample.xml

 file and click 

Edit

. Change the IP 

address on line 13 to match the server PC’s IP address. Save the file and 
close it.

Summary of Contents for UX5000





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands