manualshive.com logo in svg

NEC UX5000, Resource Manual

Share
Download
NEC UX5000 Resource Manual Download Page 161

UX5000 IP Data Maintenance

UX5000 IP Resource Manual

6 - 17

If the download succeeds:

PC side:
A message appears indicating that the download was completed successfully. 
Click the [OK] button to close the screen. 

Terminal side:

“

Download Complete!

“

 is displayed on the screen.

Press the [Exit] soft key located below the display to close the screen.

If the download fails:

PC side:

An error message appears.
Click the [OK] button to close the screen.

❍

Some displayed messages vary depending on the error. For details, see 

6.6 Appendix: Error Messages on page 6-47

. 

Terminal side:

“

Download Failed

“

 is displayed on the screen.

Press the [Exit] soft key located below the display to close the screen.

Figure 6-23  Download Successful

Figure 6-24  Error Screen

Summary of Contents for UX5000





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands