CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 96
Note:
the first analogue card in an IPS DM should be the 4LCAA as the IPS DM is not
equipped with a ringing generator.
4.8.2 Digital Station
The following cards are applied for Digital lines. To these cards the Dterm series I
terminals, the DeskConsole and the DSS Console can be connected.
12NC
Description
R
e
le
a
s
e
2
0
0
0
IP
S
IP
S
D
M
IP
S
D
M
R
Function
960051150223
PN-8DLCP
X
X
X 8 DIGITAL LINE CIRCUIT
• Used for D
term
Digital, DSS Console & DESK CON
(SN-753)
960051103311
PN-4DLCT
(from release 11)
11
X
-
-
4-line Digital Long Line Circuit Card (-48V line
power feeding)
- Used for Dterm Series i, DSS/BLF Console and
Desk Console
- Requires PZ-PW122 for -48V line power feeding
- RoHS compliant
960051150224
PN-2DLCN
upto
10
X
-
-
2-line Digital Long Line Circuit Card
• Used for Dterm Digital, DSS Console & DESKCON
(SN-753)
• Provides Line Test function.
• Equipped with –48 V DC-DC on-board power supply.
4.8.3 ISDN Station
The following cards provide the interface for the ISDN Basic rate (S0) station interface
and D-channel handler. The S0-bus interface (2ILCA) is equipped for video & data
purposes only.
12NC
Description
R
e
le
a
s
e
2
0
0
0
IP
S
IP
S
D
M
IP
S
D
M
R
Function
960051150208
SPN-2ILCA
X
X
-
2 Circuit ISDN Station Card (S/T 4 wire Interface)
• ETSI ISDN –1 Basic Rate Video & Data Terminals
Requires SPN-SC03B 8ICH(AP) for every four SPN-
2ILCA cards.
960051151233
SPN-SC03B 8ICH(AP)
X
X
-
ISDN station -channel Handler Card:
• Provides the D-Channel signaling interface and
controls a maximum of four ILC cards (Layer 2 and
3).
4.8.4 Central Office Trunk
The following cards provide the analogue trunk (SS-type signaling) and tie line (E&M
type signaling) interface. The 8COT card can also be used in combination with paging
equipment (use PN-DK00 for the relay part). In combination with the PFT card the 8COT
