CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 228
7.3.3 IPS DM/IPS DML System Capacity
Capacity Per MC
Number of PHYSICAL Modular Chassis
1
2
No. of ports
56
112
LT card
Note 1
No. of cards
7
14
No. of ports
Max. 256 ports per system
AP card
No. of cards
7
14
Total number of lines
(Analog Single Line Tel Dterm)
56
112
IP-PAD
No. of channel
32
64
8LC
56
112
Analog Single Line
Telephone (Lines)
Long Line
Not Available
Dterm (Lines)
Standard
56
112
DtermIP/INASET (PTP Connection)
Note 2
952/1 28
888/1 28
ISDN Station
10
20
Loop Start
56
112
DID w/4DIT
28
56
Central Office Trunk (Lines)
2W/4W E&M
14
28
CCIS Trunk (Peer to Peer Connection)
Max. 127
1.5M
7
DTI: 10, CCIS: 8
DTI/CCIS Digital Link
Note 3
2M
7
8
1.5M (PRT)
7
8
ISDN
4BRT (card)
5
10
IP Trunk
1
2
PFT Connections
4
8
3-Party Conference
Max. 16 conference groups per system
6-Party
Max. 4 conference groups per system
6-/10-Party Conference
10-Party
Max. 2 conference groups per system
32-Party Conference
7
Max. 8 conference
groups per system
Note 1:
Each Modular Chassis has 8 Virtual LT Ports that can only be used when using
32 PAD channels with the 8IPLA w/24IPLA.
Note 2:
SOPHO 2000 IPS DML only supports a maximum of 128 DtermIP/INASET.
Note 3:
The total number of trunk line and DTI channel shall be 256 or less. (Each trunk
line and DTI channel is required to assign the “Trunk Number” by system data
programming and maximum number of system parameter for “Trunk Number”
is 256.)
