CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 138
This feature works as a timed reminder. When a call remains on Hold, Camp-On or
ringing unanswered for a fixed interval after being transferred, the station that initiated the
hold, transfer, or Camp-On is automatically alerted.
Automatic Reconnect to Held Party (R11)
In R11 software, a station in below case can automatically reconnect to the held party:
-
Station-A is connected to station-B/outside party-B.
-
Station-A does consultation hold station-B/outside party-B, then calls outside party-C.
-
When outside party-C hangs up before station-A hangs up, station-A automatically
reconnects to the held party (outside party-B).
Automatic Wake-up
This feature allows the system to be programmed to automatically call guest rooms or
administration stations at specified times. Upon answering, the guest is connected to a
recorded announcement or music source. A printout of unanswered or blocked Automatic
Wake-Up attempts for each guest room is provided using the Hotel/Motel printer.
Background Music
Background Music can be provided on a dial-up basis over legacy Multiline Terminal
speakers. Incoming voice announcements, ringing and recalls override Background
Music. Up to 10 music programs can be offered.
Back Up CPU
SOPHO 2000 IPS provides a dual CPU system with two MP cards. When Emergency
Notification from hardware is detected, the changeover from an active MP card to a
standby MP card will occur. If the active MP card becomes out of order for any reason,
the standby MP card starts up automatically. The standby MP card employs a Cold
Standby System that will restart initialization by the changeover from the active MP card.
Bandwidth Control
This feature allows assigning an available bandwidth threshold for VoIP Traffic within a
location and between locations, and to restrict Outgoing/Incoming Calls when the VoIP
Traffic exceeds the threshold. The location is a group of VoIP devices [IP Enabled Dterm,
IP PAD, or Peer-to-Peer IP Trunks (built-in IP Trunks)], that have the same VoIP
communication parameter (such as CODEC Selection List and ToS field) values assigned.
When the VoIP Traffic over CCIS exceeds the threshold, the call can be routed to Legacy
Trunks (TDM Network). When exceeding the threshold, the system can store fault
information and provide external alarm indication.
Boss / Secretary Calling
A secretary with a Multiline Terminal can use an appearance of the boss' extension to
screen calls for that extension, and announce and/or transfer calls to that extension.
Additionally, the secretary can call the boss during a busy condition and send a Message
Waiting Indication to the boss' station.
Broker's Call
This feature allows a Multiline Terminal or Single Line Telephone user to alternate
between two parties, talking to one party while the other party remains on Hold on the
same line. The Multiline Terminal user uses the TRF or ANS key to alternate between the
