CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 176
DID number, features/applications can be retained by the employee at any location in the
network. This allows the mobile/visiting employees to retain their productivity.
User Mobility supports two scenarios.
1. User moves with their IP terminal from one site to another (the MAC address of the
terminal is not changed).
2. User moves only with the station number rather than the IP terminal (the MAC
address of the terminal is changed). In this case, they are allowed to log in (override)
on a terminal without logging out on the terminal you used before moving.
Variable Timing Parameters
This feature gives the IPS the versatility to change timing duration using the Maintenance
Administration Terminal (MAT) or the Customer Administration Terminal (CAT). All
timing parameters are set initially in the Resident System Program. These timing
parameters can be changed according to the customer's requirements.
Voice Guide
This feature provides a station user with an announcement that informs:
1.
The result of the operation when the station user set or canceled
the service feature, instead of service set tone.
2.
Which service has been set to the station; such as, Call
Forwarding - All Calls, Do Not Disturb or Message Waiting, when the station
goes off-hook, instead of special dial tone.
Voice Mail Integration
This feature is used to interface the SOPHO 2000 IPS with a locally provided stand-alone
type Voice Mail System (VMS). The VMS, connected to the SOPHO 2000 IPS single line
circuit (LC), is controlled by sending/receiving DTMF signals using this LC.
The VMS’s voice mail feature can be used by accessing this VMS directly from an
extension. If a station sets its call forwarding destination to the VMS, calls to this station
are connected to the VMS, and the messages can be registered according to the VMS
instruction. In addition, the Message Waiting lamp of the station can be turned on
automatically by the VMS.
Voice Mail Private Password
Voice Mail Password can be prevented from displaying in LCD of Multiline Terminals
when connected to the Voice Mail System.
Voice Mail Transfer
This feature has two functions that provide streamlined transfer access to voice mail.
1.
One touch access to VMS: When an Attendant transfers an external call to a
station, and if the station is busy or unanswered, the Attendant can transfer the
call to a VMS by dialing “9” or by pressing a function key provided for this
feature.
2.
Transferring Camp-On call to VMS: When an Attendant sets Camp-On to a
busy destination station for an external call, and if the destination station does
not answer by predetermined time, the call can be automatically transferred to
a VMS.
Voice over IP - (H.323)
