CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 81
3.7 ATTENDANT CONSOLE
3.7.1 Dterm Digital 32D
The Dterm Digital 32D is especially suitable for operator functions. Along with 16
programmable keys (each with a two-colour LED) and 16 quickselection keys, it offers
hands-free functionality, a headset socket and incomingcall/ message-waiting indicator
lights. The terminal also has an adjustable liquid crystal display (LCD) screen with three
lines of 24 characters per line. The Dterm Digital 32D can be programmed to manage 24
lines and eight quickselection keys, allowing the most common telephone operations to be
accessed through a single press of a key.
Functions available to users include: recall, conference, redial, transfer, reply, hands-free
and park, among others. The practical headset connector and the hands-free function
provide multiple usage options and, during a call, the reception volume can be increased
by three levels and reduced by two from the standard setting (six volume levels in total).
The terminal also offers four ringer volume settings (off, low, medium and high) and
three ringer tones (slow, medium and fast).
The additional module with 60 programmable line keys/function keys is particularly
suitable to expand a switchboard operator console, available for the SOPHO Dterm
Digital only.
Note:
Beside the Dterm 32D, also the 8D and 16D can be used when less functionality is
required. If IP connectivity is required, the SOPHO DtermIP, 16D and 32D will
fit.
3.7.2 DeskCon
The Desk Console (SN753 DESKCON) operates on a switched-loop basis with a
maximum of six Attendant Loops terminating at each Console on the associated Interface
Card. The Attendant uses these loops for answering, originating, holding, extending, and
re-entering calls. When Attendant Loop Release is used, the number of loops is
effectively increased to a maximum of 12 for each Console.
