5-10 System Unit Repair
3.
Remove the SIMM stick from the system board. Repeat step 2 for each SIMM to
be removed.
NOTE:
If more information is needed, see the
installation instructions in Section 3, Options.
Figure
5-11
SIMM
Socket
5 1/4-Inch Device Removal
Remove an 5 1/4-inch device from the 5 1/4-inch device cage per Figure 5-12, and the fol-
lowing steps.
1.
Remove the system unit cover, front panel, and 3 1/2-inch drive bracket as
previously described.
2.
Unplug all signal and power cables from the device(s) in the 5 1/4-inch device
cage (see Figure 5-12).
3.
Remove the four device screws; two from each side of the 5 1/4-inch device cage
(see Figure 5-12).
Clips