3-12 Option Installation
CAUTION:
Before installing a SIMM, reduce
static discharge by touching the system’s metal
chassis.
3.
Position the SIMM in the socket. The notched end of the SIMM allows only the
correct positioning.
4.
Insert the SIMM at an angle into the socket.
5.
Tilt the SIMM towards the locking tabs using equal pressure at the ends of the
SIMM until it locks into the socket (see Figure 3-10).
Figure 3-10 Inserting the SIMM
6.
Replace any cables or boards that may have been removed.
7.
Replace the system unit cover.
Video Upgrade
Upgrade the video memory by adding two 512-KB by 16-bit video DRAM modules as
follows.
1.
Remove the system unit cover as previously described.
2.
Locate the video DRAM sockets (see Figure 3-8).
If any expansion boards are obstructing your view of the sockets, remove the
boards (see “Expansion Board Removal”).
Clip
Notched End
of SIMM
