Setup and Operation 2-3
3.
If installing a multimedia system, connect the speakers as follows.
Attach the two-connector speaker cable to the left speaker and to the L
SPEAKER OUTPUT jack on the right speaker.
Locate the three-connector speaker cable.
Match and attach the color-coded red and white cable connectors to the color-
coded sockets on the right speaker.
Connect the other end of the cable to the line out jack on your system (see
Figure 2-3).
Connect the AC adapter to the right speaker and to a surge protector or wall
outlet.
Connect the microphone cable to the microphone in jack on your system.
Press the power switch. The power lamp lights.
Adjust the volume, treble, and bass controls as required.
Figure 2-3 Connecting the Microphone
4.
Press the power button (see Figure 2-4) to power-on the system. The power lamp
lights green, indicating that the system is in Full-Power On mode.
The system automatically goes into its Power-On Self-Test (POST), and checks
system components. One beep indicates that the system has successfully
completed its power-on test.
If a problem occurs, a series of beeps may sound. If this happens repeatedly after
powering on, power off and troubleshoot the system.
Line Out Jack
Line In Jack
Microphone In
Jack
