Setup and Operation 2-5
Use the CD-ROM reader to load and start programs from a CD or to play audio CDs. The
CD-ROM reader has the following controls and indicators:
jack for connecting headphones with a stereo mini-jack plug
volume control for adjusting the headphone volume
busy lamp that lights during read operations
open/close button for opening or closing the CD tray when the power is on. When
playing a CD, press the open/close button to stop the CD.
emergency eject hole in the front panel for manually opening the CD tray if power
is lost. Insert a jewelers screwdriver into the hole. Turn the screw
counterclockwise to open the tray and clockwise to close the tray.
CD Tray
CD Busy
Lamp
Headphone
Jack
Volume Control
Knob
Open/Close
Button
Emergency
Eject Hole
Figure 2-5 Typical CD-ROM Reader Controls and Indicators
To load a disc in the CD-ROM reader, follow these steps.
1.
Press the open/close button. The CD tray opens.
2.
Put the CD, printed side up, into the tray.
3.
Press the open/close button again and the tray closes.
4.
To remove the disc, press the open/close button. The tray opens, allowing
removal of the disc.
SYSTEM CONFIGURATION
This section describes the Setup utility program that allows the system configuration
information to be viewed and changed.
