System Unit Repair 5-11
4.
Remove the device out of the 5 1/4-inch device cage from the front of the
system unit.
NOTE:
When reinstalling the 5 1/4-inch device,
note that all power cables are keyed to fit only in
the correct position.
Figure 5-12 5 1/4-Inch Device Screws
Power Supply Removal
Remove the power supply from the system unit as follows.
1.
Remove the system unit cover and front panel as previously described.
2.
Unplug the two power cables attached to the system board's connectors.
3.
Unplug the power cables from all installed devices.
Two of Four
Screws
Power and Signal
Cables (not shown)
