4-14 Maintenance and Troubleshooting
Remove the battery and install a new battery as follows.
1.
Press outward on the battery hold-down clip.
2.
Carefully remove the battery from the unit.
3.
Unplug the two battery wires from the battery and set the battery aside for proper
disposal. Do not discard the battery in household or office trash bins. The battery
should be recycled through the manufacturer. (See directions for battery disposal
at the end of this document.)
4.
Hold the battery label side up and plug the two battery wires into the battery,
black wire to the small connector (-) and red wire to the large connector (+).
5.
Set the battery down into the compartment, wire end first, and push it down until
the clip snaps over the battery.
Figure 4-6 Replacing the Battery
