4-28 Installing Options
IDE Connector Configuration
Configuration
Primary connector
Secondary connector
2 devices (hard drive,
Zip drive)
Master - hard drive
Slave - none
Master - Zip drive
Slave - none
3 devices (hard drive,
CD-ROM, Zip drive)
Master - hard drive
Slave - none
Master - CD-ROM
Slave - Zip drive
3 devices (hard drive,
CD-ROM, DVD-ROM drive)
Master - hard drive
Slave - none
Master - CD-ROM
Slave - DVD-ROM drive
3 devices (hard drive, hard
drive, CD-ROM)
Master - hard drive
Slave - hard drive
Master - CD-ROM
Slave - none
3 devices (hard drive, hard
drive, DVD-ROM drive)
Master - hard drive
Slave - hard drive
Master - DVD-ROM drive
Slave - none
3 devices (hard drive, hard
drive, Zip drive)
Master - hard drive
Slave - hard drive
Master - Zip drive
Slave - none
4 devices (hard drive, hard
drive, CD-ROM, DVD-ROM
drive)
Master - hard drive
Slave - hard drive
Master - CD-ROM
Slave - DVD-ROM drive
4 devices (hard drive, hard
drive, CD-ROM, Zip drive)
Master - hard drive
Slave - hard drive
Master - CD-ROM
Slave - Zip drive
4 devices (hard drive, hard
drive, Zip drive, DVD-ROM
drive)
Master - hard drive
Slave - hard drive
Master - Zip drive
Slave - DVD-ROM drive
Diskette Drive Signal Cable
A diskette drive signal cable comes attached to the system board and to
the standard 1.44-MB diskette drive.
The colored edge of the cable goes to pin 1 on the cable connector. Align
the red edge of the cable with pin 1 (the notched end) on the drive
connector.