Installing Options 4-43
5.
Press the bracket cover over the front shield so the two side tabs click
into place (see the figure “The 3 1/2-inch accessible device bracket”
in the previous section).
6.
Slide the bracket into the lowest accessible bay in the chassis (for the
chassis orientation you plan to use). The tab on the end of the each
rail should click into place when the bracket is in place.
Inserting the 3 1/2-inch accessible device bracket
7.
Reconnect the power and signal cables for all devices in the two-
device bracket (see “Diskette Drive Cabling”).
8.
Replace the front panel (see “Replacing the Front Panel”).
9.
Replace the system unit cover (see “Replacing the Cover”).
