Installing Options 4-39
Inserting a 5 1/4-inch device for use in a minitower
6.
Reconnect the power and signal cables to the device (see “IDE Drive
Cabling”).
7.
Replace the front panel (see “Replacing the Front Panel”).
8.
Replace the system unit cover (see “Replacing the Cover”).
Replacing 3 1/2-Inch Accessible Devices
The following sections describe how to install 3 1/2-inch accessible
devices in the system. The installation procedures include:
!
removing a 3 1/2-inch accessible device
!
installing a 3 1/2-inch accessible device.
The 3 1/2-inch accessible devices in the system are housed in a two-
device bracket. This bracket installs in the lowest bay of the accessible
device cage, much like a 5 1/4-inch accessible device. (This applies
equally whether the system is in the desktop or minitower position.)
