![background image](http://html.mh-extra.com/html/nec/powermate-5100-service/powermate-5100-service_service-manual_248650097.webp)
Disassembly and Reassembly 3-11
Removing a 5 1/4-Inch Device
3 1/2-Inch Hard Drive Removal
Remove the 3 1/2-inch hard drive as follows.
1.
Remove the system unit cover as previously described.
2.
Unplug the power and signal cables from the hard drive.
Note:
When reinstalling the drive, note that all power
cables are keyed to fit only in the correct position.
3.
Remove the two screws securing the internal hard drive bracket to the top of
the chassis (see the following figure).
4.
Lift the internal hard drive bracket out of the slots in the chassis.
5.
Remove the screws securing the drive to the internal bracket.
Summary of Contents for POWERMATE 5100 - SERVICE
