![background image](http://html.mh-extra.com/html/nec/powermate-5100-service/powermate-5100-service_service-manual_248650104.webp)
3-18 Disassembly and Reassembly
Secured Position of Latch
A – Rail
B – Latch Closed
C – Edge of Chassis
D – Edge of System Board
6.
Replace the system unit cover (see “Replacing the Cover”).
Riser Board Removal
Remove the riser board as follows.
1.
Label and unplug all cables on the riser board and on any expansion boards.
2.
Remove all expansion boards (see “Expansion Board Removal”).
3.
Remove the system board (see “System Board Removal”).
4.
Remove the six screws along the top and bottom of the riser board (see the
following figure).
Locating the Riser Board Screws
A – Screws
Summary of Contents for POWERMATE 5100 - SERVICE
