![background image](http://html.mh-extra.com/html/nec/powermate-5100-service/powermate-5100-service_service-manual_248650066.webp)
System Configuration 2-39
8.
After selecting the FAT type, a warning screen appears indicating that the
system is about to partition and format the hard drive using the FDISK
program. This warning screen contains three options: Back, Exit, and
Continue.
Click
Back
to return to the Partition Information screen.
Click
Exit
to terminate the restore process.
Click
Continue
to perform FDISK.
If clicking
Continue
, the system performs FDISK using the FAT type
selected and reboots the system. After the reboot, all partitions are
formatted. When all the partitions have been formatted, the OS loads from
the CD. The Installing Applications screen appears. This screen also
displays the version of Windows OS being installed.
The other software components required for the operating system are also
loaded from the CD.
After the OS finishes loading, the “Operating System Restore Completed”
screen appears.
9.
Remove the CD from the CD tray.
10.
Click
OK
to reboot.
This completes the Custom Rebuild and Restore procedure.
To reinstall any of the applications or device drivers that came with the
computer, follow the procedures in “Installing Applications” and in
Appendix A, “NEC PowerMate 5100 Series Release Notes.”
To install device drivers that did not come with the computer, follow the
procedures in “NEC Driver CD.”
Restore the applications or drivers that were not provided by NEC by using the
vendor diskettes(s) or CD-ROM(s) included in its original packaging.
Restoring the Operating System
To perform an OS Restore only (the “Fix OS” procedure) for systems running
the Windows 95 or Windows 98 operating system, boot the system from the
Select Install CD. When the system boots from the CD, it automatically loads
the MS-DOS-based Operating System Restore program.
If possible, back up the data files before performing an OS restore.
Follow these steps to restore only the operating system without repartitioning or
reformatting the hard drive.
1.
Power on or restart the system and immediately insert the Select Install disc
into the CD-ROM drive.
Summary of Contents for POWERMATE 5100 - SERVICE
