NEC POWERMATE 5100 - SERVICE, Service Manual

Page: 75 / 237

2-48 System Configuration
!
CAUTION
Do not select and install drivers for any hardware that is not
currently installed on the system. Doing so can damage the
operating system.
1.
Install the device requiring the new driver before installing the driver.
2.
In Windows 95 or Windows 98 systems only, set up the system for sharing
files as follows. On Windows NT systems, go to step 3.
„
Click
Start
, select
Settings
, then highlight and select
Control Panel
.
„
Double click the
Network
icon.
„
Click
File and Print Sharing
.
„
Click the top box (“I want to give other access to my files”) so a check
mark appears.
„
Click OK . The driver installs and the system reboots.
3.
Insert the NEC Driver CD into the shared CD-ROM drive.
4.
Do a map connection to the shared CD-ROM drive.
„
From the system with the shared CD-ROM drive, double click
My
Computer and right click on the CD-ROM drive. (For example, right
click on E: if the shared CD-ROM drive is designated as drive E.)
„
In the popup menu, right click on Sharing . The Properties screen
appears.
„
In the Properties screen, click
Shared As
.
„
On Windows 95 or Windows 98 systems, type a name in the Share
Name field. (For example, type
CD-ROM in the field.)
On Windows NT systems, click the New Share button, then type a
name in the Share Name field. (For example, type CD-ROM in the
field.)
„
Click OK to return to the Properties screen.
5.
On the Client desktop, double click Network Neighborhood .
6.
Double click Entire Network .
7.
Click the name of the computer with the shared CD-ROM drive. Double
click the name of the shared CD-ROM drive.
8.
Access the subdirectory that corresponds to the driver being installed.
9.
Double click the setup.exe icon corresponding to the driver being installed.