NEC POWERMATE 5100 - SERVICE, Service Manual

Page: 51 / 237

2-24 System Configuration
Exit Menu
Selecting the Exit menu displays the exit options listed in the following table.
Exit Menu Options
Menu Item Settings and Description
Exit Saving Changes Saves the setting just made and exits BIOS.
Exit Discarding Changes Discards the changes just made and reverts back to the
settings existing before starting the BIOS session.
Load Setup Defaults Reverts to the factory-shipped settings.
Maintenance Menu
The Maintenance menu only appears when the system board has been jumpered
for Configure mode. (See Section 4, “System Board” for system board jumper
settings.) When the system is restarted in Configure mode, the Setup utility
launches automatically and comes up in the Maintenance menu. (The Main,
Advanced, Power Management, Security, Boot, and Exit menus are also
available.)
The Maintenance menu provides access to the options listed in the following
table.
!
CAUTION
Starting the system in Configure mode resets BIOS settings
to their factory defaults. Before jumpering for Configure
mode, write down any customized BIOS settings. When the
system is started in Normal mode, press
F2
to bring up the
BIOS Setup utility. Re-customize the BIOS settings.
Maintenance Menu Options
Menu Item Settings and Description
Processor Speed Sets the following processor speeds:
233 MHz, 266 MHz, 300 MHz, 333 MHz
Clears All Passwords [Enter]
Clears the User and Supervisor passwords.
Press Enter to open a dialog box asking for confirmation
that the passwords should be cleared.