![background image](http://html.mh-extra.com/html/nec/powermate-5100-service/powermate-5100-service_service-manual_248650101.webp)
Disassembly and Reassembly 3-15
Removing the System Board
4.
If the system board is being replaced, remove the CPU and the DIMMs from
the board and install them on the new board.
System Board Replacement
If you remove the system board from the computer, take care in replacing the
board. Replacing the board requires the use of the chassis latch. Incorrect use of
the chassis latch can damage it.
Replace the system board as follows.
!
CAUTION
Take care in replacing the system board in the computer.
Incorrect use of the chassis latch can damage the latch. Use
the following procedure to use the latch correctly.
1.
Make sure the chassis latch is in the open position.
2.
Position the narrow end of the system board rail in the chassis guide.
Summary of Contents for POWERMATE 5100 - SERVICE
