NEC PD78076 User Manual Download Page 613

Page: 613 / 627

613

APPENDIX C EMBEDDED SOFTWARE

For efficient program development and maintenance of the

PD78078, 78078Y Subseries, the following

embedded software is available.

Real-time OS (1/2)

RX78K/0

A real-time OS conforming to

ITRON specifications.

Real-time OS

Added with the tool (configurator) to create the RX78K/0 nucleus and multiple information table.

Used in combination with separately available Assembler Package (RA78K/0) and Device File

(DF78078).

<Precautions for the use in PC environment>

Real-time OS is a DOS-based application. Use it with DOS prompt on Windows.

Part number:

SxxxxRX78013-

∆∆∆∆

Caution When purchasing the RX78K/0, fill in the purchase application form in advance, and sign the

License Agreement.

Remark

xxxx and

∆∆∆∆

in the part number differs depending on the host machine and OS used.

SxxxxRX78013-

∆∆∆∆

Product Outline

Max. No. for Use in Mass Production

001

Evaluation object

Do not use for mass production.

100K

Mass-production object

100,000

001M

1,000,000

010M

10,000,000

S01

Source program

Source program for mass-production object

xxxx

Host Machine

Supply Media

AA13

PC-9800 series

Japanese Windows

Notes1, 2

3.5-inch 2HD FD

AB13

IBM PC/AT and

Japanese Windows

Notes1, 2

3.5-inch 2HC FD

BB13

compatibles

English Windows

Notes1, 2

3P16

HP9000 series 700

HP-UX

(Rel. 9.05)

DAT (DDS)

3K13

SPARCstation

SunOS (Rel. 4.1.4)

3.5-inch 2HC FD

3K15

1/4-inch CGMT

3R13

NEWS (RISC)

NEWS-OS (Rel. 6.1)

3.5-inch 2HC FD

3R15

1/4-inch CGMT

Notes

1. Operates also in DOS environment.

2. Does not support WindowsNT.

Summary of Contents for PD78076




















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PD78076

Reviews:

Related manuals for PD78076

Brands by name

Popular brands

NEC PD78076, User Manual

Search results

Summary of Contents for PD78076

Reviews:

Related manuals for PD78076

Brands by name

Popular brands