CHAPTER 3
ND-45492 (E)
Page 46
Revision 2.0
2. Wall Mounting Installation
(1) Using four appropriate fasteners (locally provided; see
Table 003-1
) for the type of wall construction, se-
cure the RACK PARTS as shown in
Figure 003-21
. For the wall mounting points, refer to
Figure 002-2
in
NAP-200-002.
Note:
For the wall-mounting installation, a concrete wall is recommended because the concrete wall is more firm
to mount the PBX than a wooden wall or a plaster board. The plaster board is the most infirm wall of the
three.
NAP 200-003
Sheet 24/37
Installation of Main Equipment
Table 003-1 Recommended Fasteners
WALL TYPE
RECOMMENDED FASTENER
PLASTER BOARD
[THICKNESS Min. 9.6 mm
(0.38 inch)]
MOLLY ANCHOR TYPE
Min. 3.5 mm (0.14 inch) DIA.
Max. 4.5 mm (0.17 inch) DIA
WOOD
WOOD TYPE SCREWS
Min. 3.5 mm (0.14 inch) DIA
Max. 4.5 mm (0.17 inch) DIA
CONCRETE
ANCHOR BOLT TYPE
Recommended 4 mm (0.16 inch) by
25 mm (0.98 inch)
