Built-in AIT
97
4
Remove the data cartridge from
the slot and close the dust cover.
• When the TAPE MOTION LED is lit or blinking, do not turn off the basic processing unit. This
may cause a malfunction or damage data.
• To avoid malfunction, do not transport this unit with the data cartridge installed.
• Eject the data cartridge when you are done performing a backup.
LED indication
Three LED on the Built-In AIT’s front side signal the status of the drive and the AIT data
cartridge.
Blink (Fast)
: 0.3 s ON, 0.3 s OFF
Blink (Slowly)
: 0.9 s ON, 0.3 s OFF
Reading/writing data
To read/write the data from/to the AIT data cartridge, see the instruction manual provided
with the backup application.
LED
OFF
ON
Blink (Slow)
Blink (Fast)
All LED:
Blink (Fast)
TAPE MOTION
No data cartridge set.
Data cartridge set.
Set data cartridge
operating normally
(Write/Read).
Set data cartridge
operating normally
(Other than Write/
Read).
Malfunction
CLEANING REQUEST
Built-In AIT does not
need cleaning.
Built-In AIT needs
cleaning.
Cleaning head or
cleaning cartridge
tape ended.
-
REPLACE TAPE
No data cartridge
error.
Data cartridge error.
-
-