Built-in AIT
95
3
Set the AIT data cartridge
orientation as shown here and
insert it into the data cartridge
slot.
By inserting the data cartridge to
the extent, it is automatically set
in the drive and the TAPE
MOTION LED lights.
Important
When a new (blank) data cartridge is set, it will take a few minutes before the TAPE MOTION LED
lights up.
4
Close the dust cover.
Important
• Installing the dust cover
To avoid damaging the dust cover, it
is designed to be easy to install and
remove.To install the dust cover, hold
it slightly (as illustrated) and insert
the pins at both ends of the cover in
turn until you hear them clik.
Dust cover
Fig. 1
