Built-in AIT
81
3.0 mm
metric screw
Rail
Front cover
Fig. 3
• The screws needed with the 5.25-in and 3.5-in devices are the same.
• Always use the screws that are provided with this device. The screws that
are provided with this device are metric screws (length: 4.0 mm; length
below washer: 3.0 mm). Using screws that are longer than the screws that
are provided with this device could result in damage to the device.
Caution
Do not use any damaged power cord.
If the power cord is damaged, immediately replace it with a new part of
same type. Do not repair the damaged section for reuse. Otherwise,
the section repaired with vinyl tape or the like will be overheated to
cause an electric shock or a fire.
Important
When connecting this device to the NEC Express 5800/110Eh, 120Ef or 120Ga, use the IDE
cable supplied with the host machine. Otherwise, use the IDE cable supplied with this device.
However, if other instructions are provided with the host machine, please follow those instead.
