96
Built-in AIT
Ejecting the AIT data cartridge
1
Confirm that the TAPE MOTION LED is not blinking.
2
Pressing the EJECT button, Built-
In AIT starts rewinding the tape.
When the tape is completely
rewound, the data cartridge is
automatically ejected from the
Built-In AIT.
Important
• Pressing the EJECT button does not eject the cartridge immediately because of the
rewinding or system information update operation. (It may take about 5 minutes.)
While the LED is blinking, this indicates the cartridge is being ejected and is not an
error.
• Depending on your backup software or operating system lock, you may not be able to
eject the data cartridge in the drive by pressing the EJECT button. Eject the data
cartridge from the backup software or wait some time and retry the EJECT button. If
you are still unable to eject the data cartridge, press and hold the EJECT button for 5
or 10 seconds to forcefully eject the data cartridge.
3
Open the dust cover.
