![background image](http://html.mh-extra.com/html/nec/mdview-232/mdview-232_manual_248465168.webp)
Error/Description
Local Sync Resolution*
Remote Sync Resolution*
Server connection could
not be established.
When link with the server
cannot be established at
start of Sync session,
error displays and Sync
is canceled.
l
Check the USB cable is attached.
l
Check that the High Definition Mobile Sync icon is
displayed on Windows Taskbar and is not crossed out.
l
If USB cable is attached and a cross displays on XCPC
icon, restart XCPC software.
l
Detach and attach USB cable.
l
If all the above steps fail, restart PC and power the
phone Off and power it back On.
l
Check that the wireless phone has service and the
service provider is displayed.
l
Check that the GPRS icon displays on the phone. If it
does not display, check with your service provider to
confirm you have GPRS service in your area and that it
is enabled.
Invalid user name or
password.
Server has rejected the
user name and
password.
l
Check the password set in the XCPC security options
screen in the PC XCPC software. These entries should
match the wireless phone user id password.
l
Check the XCPC configuration. Make sure that the user
id and password are the same as assigned to you by the
Internet service provider. The user id and passwords are
case sensitive.
Synchronization
canceled.
There is an error during
Sync.
l
Retry Sync a couple of times.
l
Reset XCPC logs and retry Sync.
l
Power the phone Off, back On, and try Sync again.
l
Check that the total phone entries have not reached full
limits. If full, then start deleting some entries.
l
Retry Sync a couple of times.
l
If you are getting the cancellation immediately after
starting, power the phone Off and back On. The wireless
phone connectivity has to be reset.
Sync Started or Sync in
progress screen is
displayed for a long time.
Phone received some
data from server
l
Check that “Accept” or “Cancel” has been selected on
the XCPC Accept dialogue box.
l
Restart XCPC and initiate Sync again.
l
The Sync process may take a long time due to poor data
rate, bad service, the number of entries, or the type of
Sync process. If taking a long time, cancel Sync and try
again. Just remember that the next synchronization will
be a full Sync process after a Sync process is
interrupted or canceled.
Device Full. Server has
more than the maximum
amount allowed in the
phonebook, Scheduler,
or ToDo tasks.
l
XCPC handles the error and “Device Full” message
does not appear on the phone.
l
Cleanup old and unwanted entries in the remote server.
* Check the resolution items in sequence listed.
160
Summary of Contents for MDview 232
